Difference between revisions of "TFTP server manage netboot kernels"
 
(6 intermediate revisions by the same user not shown)
Line 3: Line 3:
  
  
 +
=Prepare NetBoot kernel=
  
 +
All these steps must be done on the server who has the kernel you want to extract.
  
−
=TFTP configuration=
+
Best practice: ''<big>you should perform the kernel extraction on the TFTP server!</big>''
  
−
TFTP can manage different configurations, up to 1 per host!
 
  
−
This is how a ThinClient (= netBoot client) will retrieve its configuration:
 
  
 +
==IMPORTANT NOTES==
  
−
[[File:TFTP getConfiguration().png|none|TFTP getConfiguration()]]
+
You're about to extract a server kernel and make it available for NetBooting. Make sure that:
  
 +
* The '''kernel has all the drivers installed and configured'''
 +
* The '''kernel doesn't need a reboot'''
  
−
As you can see you have 3 possibilities:
+
If your client(s) will use some specifics drivers then you MUST install these drivers before going through the following steps.
  
 +
You need to be very careful, especially if you plan to use some smart-card reader!
  
−
1. '''MAC @ filter'''. Configuration file name must be:
 
−
* Start with ARP type '01-'
 
−
* all in lower case hexadecimal
 
−
* dash '-' separators instead of ';'
 
−
for example a MAC @ 88:99:AA:BB:CC:DD would search for the filename 01-88-99-aa-bb-cc-dd.
 
  
  
−
2. '''IP @ filter'''. Configuration file name must be:
+
==Create TFTP Kernel directory==
−
* host IP / network address in hexadecimal
 
−
* all in upper case
 
−
e.g. 192.0.2.91 -> C000025B
 
  
 +
Create the TFTP kernel's folder. You should create '''1 folder for each kernel''' you'd like to provide in NetBoot.
  
−
3. '''Default configuration'''
+
<syntaxhighlight lang="bash">
 +
# Ubuntu 14.04 - Kernel version 3.13.0.32 (August 2014)
 +
mkdir -p /tftpboot/images/trusty
 +
</syntaxhighlight>
  
  
−
To learn more about all the available option, check out http://www.syslinux.org/wiki/index.php/PXELINUX.
 
  
 +
==Enable NFS support==
  
 +
Copy initramfs settings for PXE boot
  
 +
<syntaxhighlight lang="bash">
 +
cp -r /etc/initramfs-tools /etc/initramfs-pxe
 +
</syntaxhighlight>
  
  
 +
Adjust PXE boot configuration
  
 +
<syntaxhighlight lang="bash">
 +
cd /etc/initramfs-pxe/
 +
vim /etc/initramfs-pxe/initramfs.conf
 +
</syntaxhighlight>
  
−
---------------------------------------
 
  
 +
Add / adjust the following options:
  
 +
<syntaxhighlight lang="bash">
 +
BOOT=nfs
 +
MODULE=netboot
 +
</syntaxhighlight>
  
−
=Prepare NetBoot kernel=
 
  
  
−
'''Make sure that the server you're gonna use to extract the kernel has all the drivers setup and doesn't need a reboot before starting'''
+
==Copy and prepare kernel==
  
 +
Copy kernel's files
  
−
== If your client(s) will use some specifics drivers then you MUST install these drivers before going through the following steps.
+
<syntaxhighlight lang="bash">
−
 
+
cp /boot/vmlinuz-`uname -r` /tftpboot/images/trusty/vmlinuz
−
 
+
cp /boot/initrd.img-`uname -r` /tftpboot/images/trusty/initrd.img
−
You need to be very careful, especially if you plan to use some smart-card reader!
+
</syntaxhighlight>
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
==Create NetBoot menu | defaults==
 
−
 
 
−
Now, we have to specify which kernel to use and which distributions are available for NetBoot.
 
  
  
−
Create the default configuration file:
+
Enable NFS boot option
  
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
−
vim /tftpboot/pxelinux.cfg/default
+
mkinitramfs -d /etc/initramfs-pxe -o /tftpboot/images/trusty/initrd.img
 
</syntaxhighlight>
 
</syntaxhighlight>
  
  
−
Put the following:
+
Adjust rights
  
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
−
# Debian 7.x
+
chmod -R 755 /tftpboot/images/
−
LABEL wheezy
 
−
    kernel images/wheezy/vmlinuz
 
−
    initrd images/wheezy/initrd.img
 
−
 
 
−
# Ubuntu 14.04
 
−
LABEL trusty
 
−
    kernel images/trusty/vmlinuz
 
−
    initrd images/trusty/initrd.img
 
−
 
 
−
 
 
−
# Prompt user for selection
 
−
PROMPT 1
 
−
# No timeout
 
−
TIMEOUT 0
 
 
</syntaxhighlight>
 
</syntaxhighlight>
  
−
* Each LABEL is a specific configuration that will displayed on the NetBoot menu.
 
−
* PROMPT 0 = enable user prompt so you can choose the configuration
 
−
* TIMEOUT 0 = timeout (in seconds) before the default option is chosen. 0 == no timeout
 
  
  
 +
Notes:
  
−
Note that I used a reference to "trusty/", that's a folder I need to create later on.
+
* Do NOT use some symlink for "vmlinuz" and "initrd.img" !! It won't work.
  
 +
* If you don't want to use `uname -r` [current kernel version and architecture] then adjust the values to target kernel number + architecture. You can use the `uname -r`command's result.
  
 +
* You have to run ''mkinitramfs'' for each kernel you'll provide
  
−
==Init Kernel files==
+
* Don't forget to adjust the rights to 755 for every distribution
  
  
−
===Create directories===
 
  
−
Create the target kernel folders. You should create 1 folder for each distribution you'd like to provide in NetBoot.
 
  
−
<syntaxhighlight lang="bash">
+
==Kernel modules and source==
−
# Debian 7.x
 
−
mkdir -p /tftpboot/images/wheezy
 
−
 
 
−
# Ubuntu 14.04
 
−
mkdir -p /tftpboot/images/trusty
 
−
</syntaxhighlight>
 
−
 
 
−
 
 
−
===Prepare ''initramfs'' to boot over NFS===
 
−
 
 
−
'''This step must to be run on the machine that has the kernel you are going to serve to your clients'''.
 
  
 +
Your NFS image must have the kernel's libraries and modules, and that must match the kernel's version of the TFTP server!!
  
−
>>> In our case it has to be run on the TFTP server
+
Since Linux kernel is evolving every month or so, you need to backup your kernel's libraries and modules for future use.
  
  
−
 
+
Create kernel source directory
−
Copy initramfs settings for PXE boot
 
  
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
−
cp -r /etc/initramfs-tools /etc/initramfs-pxe
+
# Ubuntu 14.04 - Kernel version 3.13.0.32 (August 2014)
 +
mkdir -p /tftpboot/sources-images/trusty/lib/modules
 +
mkdir -p /tftpboot/sources-images/trusty/usr/src
 
</syntaxhighlight>
 
</syntaxhighlight>
  
  
−
Adjust PXE boot configuration
+
Copy libraries and modules
  
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
−
cd /etc/initramfs-pxe/
+
# Copy kernel modules
−
vim /etc/initramfs-pxe/initramfs.conf
+
cp -r /lib/modules/`uname -r` /tftpboot/sources-images/trusty/lib/modules
 +
 
 +
# Copy kernel sources
 +
cp -r /usr/src/linux-headers-`uname -r` /tftpboot/sources-images/trusty/usr/src/
 
</syntaxhighlight>
 
</syntaxhighlight>
  
  
  
−
Add / adjust the following options:
 
−
 
−
<syntaxhighlight lang="bash">
 
−
BOOT=nfs
 
−
MODULE=netboot
 
−
</syntaxhighlight>
 
  
 +
=Update TFTP configuration=
  
 +
If you haven't configure TFTP boot yet, check-out [[TFTP_server_PXE_configuration]]
  
−
===Copy and prepare kernel===
 
  
  
−
You have to copy your current kernel files to the boot folder:
+
To use your new kernel you just need to update TFTP configuration file.
  
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
−
# Debian 7.x
+
vim /tftpboot/pxelinux.cfg/default
−
cp /boot/vmlinuz-`uname -r` /tftpboot/images/wheezy/vmlinuz
 
−
cp /boot/initrd.img-`uname -r` /tftpboot/images/wheezy/initrd.img
 
−
 
 
−
# Ubuntu 14.04
 
−
cp /boot/vmlinuz-`uname -r` /tftpboot/images/trusty/vmlinuz
 
−
cp /boot/initrd.img-`uname -r` /tftpboot/images/trusty/initrd.img
 
 
</syntaxhighlight>
 
</syntaxhighlight>
  
  
  
−
Enable NFS boot on target kernel:
+
Put the following instead of the previous kernel:
  
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
−
mkinitramfs -d /etc/initramfs-pxe -o /tftpboot/images/trusty/initrd.img
+
# Ubuntu 14.04
 +
    kernel images/trusty/vmlinuz
 +
    initrd images/trusty/initrd.img
 
</syntaxhighlight>
 
</syntaxhighlight>
  
  
−
Adjust rights:
 
  
−
<syntaxhighlight lang="bash">
+
=Debug kernel=
−
chmod -R 755 /tftpboot/images/
+
 
−
</syntaxhighlight>
+
During NetBoot client startup you might encounter some '''modprobe errors'''.
  
 +
That means the thin client failed to access your kernel's libraries and / or modules.
  
  
−
Notes:
+
==NFS image update==
  
−
* Do NOT use some symlink for "vmlinuz" and "initrd.img" !! It won't work.
+
Access your NFS image by CHROOT /nfs/... + login
  
−
* If you don't want to use `uname -r` [current kernel version and architecture] then adjust the values to target kernel number + architecture
 
  
−
* You have to run ''mkinitramfs'' for each kernel you'll provide
 
  
−
* Don't forget to adjust the rights to 755 for every distribution
+
1. Be sure to '''install the kernel's header''' on the NFS image:
  
 +
<syntaxhighlight lang="bash">
 +
apt-get install linux-headers-3.13.0-32
 +
apt-get install linux-headers-3.13.0-32-generic
 +
</syntaxhighlight>
  
 +
<small>''Replace "3.13.0-32" by your version''</small>
  
  
  
−
==Kernel modules and source==
+
2. Check the symlinks
  
−
-- This is an optional step ; but it can avoid many bugs --
+
Sometimes when there is just 1 kernel the OS will check for libraries in ''/lib/modules'' instead of ''/lib/modules/kernel-version''
  
  
−
If you're using a local kernel as the default NetBoot kernel, then you need to do copy the ''modules'' + ''kernel source'' to every distribution.
+
You can try to copy all the modules files to /lib/modules and adjust the symlink.
  
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
−
# Copy kernel modules
+
cd /lib/modules
−
cp -r /lib/modules/`uname -r` /nfs/trusty/lib/modules
+
mv 3.13.0-32-generic/* .
 +
rm -rf 3.13.0-32-generic
 +
ln -s /lib/modules/ /lib/modules/3.13.0-32-generic
 +
</syntaxhighlight>
 +
 
 +
<small>''Replace "3.13.0-27" by your version''</small>
  
−
# Copy kernel sources
 
−
cp -r /usr/src/linux-headers-`uname -r` /nfs/trusty/usr/src
 
−
</syntaxhighlight>
 
−
 
  
−
Note that '''you have to adjust the /nfs'''/XXX
+
That should do !

Latest revision as of 11:31, 21 August 2014



Prepare NetBoot kernel

All these steps must be done on the server who has the kernel you want to extract.

Best practice: you should perform the kernel extraction on the TFTP server!


IMPORTANT NOTES

You're about to extract a server kernel and make it available for NetBooting. Make sure that:

  • The kernel has all the drivers installed and configured
  • The kernel doesn't need a reboot
If your client(s) will use some specifics drivers then you MUST install these drivers before going through the following steps.

You need to be very careful, especially if you plan to use some smart-card reader!


Create TFTP Kernel directory

Create the TFTP kernel's folder. You should create 1 folder for each kernel you'd like to provide in NetBoot. 

# Ubuntu 14.04 - Kernel version 3.13.0.32 (August 2014)
mkdir -p /tftpboot/images/trusty


Enable NFS support

Copy initramfs settings for PXE boot 

cp -r /etc/initramfs-tools /etc/initramfs-pxe


Adjust PXE boot configuration 

cd /etc/initramfs-pxe/
vim /etc/initramfs-pxe/initramfs.conf


Add / adjust the following options: 

BOOT=nfs
MODULE=netboot


Copy and prepare kernel

Copy kernel's files 

cp /boot/vmlinuz-`uname -r` /tftpboot/images/trusty/vmlinuz
cp /boot/initrd.img-`uname -r` /tftpboot/images/trusty/initrd.img


Enable NFS boot option 

mkinitramfs -d /etc/initramfs-pxe -o /tftpboot/images/trusty/initrd.img


Adjust rights 

chmod -R 755 /tftpboot/images/


Notes:

  • Do NOT use some symlink for "vmlinuz" and "initrd.img" !! It won't work.
  • If you don't want to use `uname -r` [current kernel version and architecture] then adjust the values to target kernel number + architecture. You can use the `uname -r`command's result.
  • You have to run mkinitramfs for each kernel you'll provide
  • Don't forget to adjust the rights to 755 for every distribution



Kernel modules and source

Your NFS image must have the kernel's libraries and modules, and that must match the kernel's version of the TFTP server!!

Since Linux kernel is evolving every month or so, you need to backup your kernel's libraries and modules for future use.


Create kernel source directory 

# Ubuntu 14.04 - Kernel version 3.13.0.32 (August 2014)
mkdir -p /tftpboot/sources-images/trusty/lib/modules
mkdir -p /tftpboot/sources-images/trusty/usr/src


Copy libraries and modules 

# Copy kernel modules
cp -r /lib/modules/`uname -r` /tftpboot/sources-images/trusty/lib/modules

# Copy kernel sources
cp -r /usr/src/linux-headers-`uname -r` /tftpboot/sources-images/trusty/usr/src/



Update TFTP configuration

If you haven't configure TFTP boot yet, check-out TFTP_server_PXE_configuration


To use your new kernel you just need to update TFTP configuration file. 

vim /tftpboot/pxelinux.cfg/default


Put the following instead of the previous kernel: 

# Ubuntu 14.04
    kernel images/trusty/vmlinuz
    initrd images/trusty/initrd.img


Debug kernel

During NetBoot client startup you might encounter some modprobe errors.

That means the thin client failed to access your kernel's libraries and / or modules.


NFS image update

Access your NFS image by CHROOT /nfs/... + login


1. Be sure to install the kernel's header on the NFS image: 

apt-get install linux-headers-3.13.0-32
apt-get install linux-headers-3.13.0-32-generic

Replace "3.13.0-32" by your version


2. Check the symlinks

Sometimes when there is just 1 kernel the OS will check for libraries in /lib/modules instead of /lib/modules/kernel-version


You can try to copy all the modules files to /lib/modules and adjust the symlink. 

cd /lib/modules
mv 3.13.0-32-generic/* . 
rm -rf 3.13.0-32-generic 
ln -s /lib/modules/ /lib/modules/3.13.0-32-generic

Replace "3.13.0-27" by your version


That should do !

Retrieved from "http://www.daxiongmao.eu/wiki/index.php?title=TFTP_server_manage_netboot_kernels&oldid=1272"