Diskless netboot

Revision as of 11:45, 23 May 2014 by WikiFreak (talk | contribs)

Diskless server / workstation using netboot


NFS is a technology that allow you to share some files and folders over the network. So:

  • All the clients will share the installation, configuration files and so on.
  • Each client will run a dedicated instance of the operating system
  • Logs will be centralized on the common NFS server - so we don't loose data on each reboot.

You must have a working DHCP server + NetBoot before starting this part.


Requirements:


Installation

NFS support 

apt-get install nfs-kernel-server nfs-common

Debootstrap (manage netboot image) 

apt-get install debootstrap


NFS server setup

Preparation

You have to create a dedicated folder on your server where you will host the client image. 

mkdir -p /srv/nfsroot
chmod -R 777 /srv/nfsroot


Configuration

The NFS configuration is done in the /etc/exports file 

vim /etc/exports


Add something like that: 

  /srv/nfsroot      192.168.2.0/24(ro,no_root_squash,async,insecure,no_subtree_check)


Adjust "192.168.2.0/24" to your own network address

  • rw : Allow clients to read as well as write access
  • ro : Read only access
  • insecure : Tells the NFS server to use unpriveledged ports (ports > 1024).
  • no_subtree_check : If the entire volume (/users) is exported, disabling this check will speed up transfers.
  • async : async will speed up transfers.
  • no_root_squash: This phrase allows root to connect to the designated directory.


- NOTE -

It's always a good idea to use Read-Only if you plan to share this disk.

That will avoid user to mess with your image!


Security

Like TFTP, this part is insecure !

You must restrict the access to your NFS server by a firewall script and filtering BEFORE reaching the LAN !


NFS is using dynamic ports numbers because it runs over rpcbind. Making NFS using specifics port is a pain in the ass !! :(

So, instead of that you should allow your LAN communication. 


    IPTABLES=`which iptables`
    LAN_ADDRESS="192.168.2.0/24"

    # Allow LAN communication
    $IPTABLES -A INPUT -s $LAN_ADDRESS -d $LAN_ADDRESS -m state ! --state INVALID -j ACCEPT
    $IPTABLES -A OUTPUT -s $LAN_ADDRESS -d $LAN_ADDRESS -m state ! --state INVALID -j ACCEPT


Management

service nfs-kernel-server {status|start|stop|restart}


Test the server

Install the NFS v4 client: 

apt-get install nfs-common


To mount the default path: 

mount -t nfs nfs-server:/ /mnt

You'll see: "/mnt/srv/nfsroot"


It's better to do: 

mount -t nfs nfs-server:/srv/nfsroot /mnt



NFS client image

There are different way to setup a NFS client image.

The main ones are:

  • debootstrap
  • copying the install from your server
  • Manual install on a client, then, when the system is ready, copy everything to the NFS share


Debootstrap: setup client distribution

Setup distribution folder

You have to create one target for each distribution you want to serve: 

mkdir -p /srv/nfsroot/trusty
chmod -R 777 /srv/nfsroot/trusty

- NOTES -

  • The folder name should match your NetBoot settings. Folder name = a LABEL in the NetBoot config.
  • The folder name should match a Linux (Debian like) distribution name


Populate the content

cd /srv/nfsroot/trusty
debootstrap trusty /srv/nfsroot/trusty


Configure client distribution

Access distribution

# "mount" the system
chroot /srv/nfsroot/trusty/

From here you can perform operation as if you were on a separate machine.

Only the current distribution (= the client one) will be affected.


Adjust default login/password

First of all, you have to create / adjust the default user. 

# Add new user
adduser <username>
# Add user to sudoers group
usermod -a -G sudo <username>


Now you can use that user: 

su <username>
sudo -s

You can check that you really are in the "Virtual machine" by checking "/srv/". It should be empty !


Update sources.list and install key packages

Your client need to have some key packages in order to work. Without these package even the NetBoot will fail !!


First of all: edit your sources.list 

apt-get install vim
vim /etc/apt/sources.list


Put the following: 

### Custom repositories list
#
# May 2014 - Guillaume Diaz
# This is an ajdustement of the default "debootstrap" sources.list
# This is required to provided update, security and advanced tools to all our clients
#

# Official repositories
deb http://se.archive.ubuntu.com/ubuntu/ trusty main restricted universe multiverse
deb http://se.archive.ubuntu.com/ubuntu/ trusty-updates main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu trusty-security main restricted universe multiverse

# Official updates 
deb http://se.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse

# Canonical partners
deb http://archive.canonical.com/ubuntu trusty partner

# Community partners
deb http://extras.ubuntu.com/ubuntu trusty main


Update your package list: 

apt-get update && apt-get upgrade


Now, you can install the basic programs: 

# NFS client. This is ABSOLUTELY MANDATORY ! That's the only way to mount the /root
apt-get install nfs-common

# NFS is a bit low, and if you're using many client it might result in time faults. 
# You must install NTP to overcome this !!
apt-get install ntp ntpdate

# Basic set of utilities
apt-get install unzip zip
apt-get install make autoconf automake cpp gcc build-essential
apt-get install htop
apt-get install python3

# Advanced APT manager (require to add repository from command line)
apt-get install software-properties-common python-software-properties


# JAVA (that is required for my application)
# Depending on your target usage you might not need it.
add-apt-repository ppa:webupd8team/java 
apt-get update && apt-get upgrade
apt-get install oracle-java7-installer oracle-jdk7-installer


Adjust bash and vim configuration

Edit your VIM configuration: 

vim /etc/vim/vimrc

Enable dark background, set nu, set ruler


Edit your bash configuration files to adjust the alias and enable auto-completion: 

vim /etc/bash.bashrc
vim /home/<username>/.bashrc
vim /root/.bashrc




Custom NetBoot configuration

Basic configuration

You can setup your own netboot configuration.

To do so, you can re-use one of the syslinux templates: 

# Create folders
mkdir /var/lib/tftpboot/custom
mkdir /var/lib/tftpboot/custom/pxelinux.cfg

# Create configuration files
cp /usr/lib/syslinux/pxelinux.0 /var/lib/tftpboot/custom


The pxelinux.cfg folder is mandatory. Inside you can provide:

  • configuration for a specific IP @ or hostname
  • configuration for a group
  • default configuration (required)


Create the default configuration file: 

vim /var/lib/tftpboot/custom/pxelinux.cfg/default


Put the following: 

# Ubuntu 14.04
LABEL TRUSTY
    kernel trusty/vmlinuz
    initrd trusty/initrd.img
    # Set NFS share as default root 
    append root=/dev/nfs nfsroot=192.168.2.2:/srv/nfsroot/trusty


# Prompt user for selection
PROMPT 0

TIMEOUT 30
  • Each LABEL is a specific configuration that will displayed on the NetBoot menu.
  • PROMPT 1 = enable user prompt so you can choose the configuration
  • TIMEOUT 30 = timeout (in seconds) before the default option is choosen


Note that I used a reference to "trusty/", that's a folder I need to create later on.


Create boot files

mkdir /var/lib/tftpboot/custom/trusty
# Copy current boot files
cp /boot/vmlinuz-3.2.0-4-amd64 /var/lib/tftpboot/custom/trusty/
cp /boot/initrd.img-3.2.0-4-amd64 /var/lib/tftpboot/custom/trusty/
# Create symlinks
ln -s /var/lib/tftpboot/custom/trusty/vmlinuz-3.2.0-4-amd64 /var/lib/tftpboot/custom/trusty/vmlinuz
ln -s /var/lib/tftpboot/custom/trusty/initrd.img-3.2.0-4-amd64 /var/lib/tftpboot/custom/trusty/initrd.img


- NOTES -

  • Adjust the 3.2.0-4 kernel number to the version you are using
  • Do NOT use symlinks !! It won't work !!
  • Don't forget to set all the rights ("chmod 777"). See the Security section below.


Advanced menu

Install menu manager

Text menu: 

cp /usr/lib/syslinux/menu.c32 /var/lib/tftpboot/custom/


Graphic menu: 

cp /usr/lib/syslinux/vesamenu.c32 /var/lib/tftpboot/custom/
cp /mySuperPicture/logo.png /var/lib/tftpboot/custom/pxelinux.cfg/

The associate picture must be a PNG 800x600 picture and MUST be named logo.png.


Configure boot options

Then edit the PXE boot file: 

vim /var/lib/tftpboot/custom/pxelinux.cfg/default


Put: 

#### GENERIC OPTIONS #####
# Enable text menu
#DEFAULT menu.c32
# Enable graphical menu
DEFAULT vesamenu.c32
# Prompt for user input? (0 = choose from menu, 1 = you can type anything)
PROMPT 0
# Allow or not the user to left the menu (1 = user is locked to the menu)
NOESCAPE 1
# Time before using default option
TIMEOUT 50


#### Menu settings #####
MENU TITLE my super netboot menu
MENU BACKGROUND pxelinux.cfg/logo.png
MENU WIDTH 80
MENU ROWS 14
MENU MARGIN 10


#### Distributions #####
# Ubuntu 14.04
LABEL trusty
    MENU LABEL Ubuntu 14.04 (trusty)
    MENU DEFAULT
    # Kernel and boot files
    KERNEL trusty/vmlinuz
    initrd trusty/initrd.img
    ### Boot options
    # Set NFS share as default root 
    APPEND root=/dev/nfs nfsroot=192.168.2.2:/srv/nfsroot/trusty

# Installation disk
    MENU LABEL rescue disk
    # Kernel and boot files
    KERNEL trusty/vmlinuz
    initrd rescue/amd64/initrd.img


Note all the "MENU" commands + PROMPT 0


Security notes

in order to work you must adjust the rights of your "/var/lib/tftpboot/". 

chmod -R 777 /var/lib/tftpboot



References

Ubuntu diskless how-to: https://help.ubuntu.com/community/DisklessUbuntuHowto Super video tutorials:

Retrieved from "http://www.daxiongmao.eu/wiki/index.php?title=Diskless_netboot&oldid=313"