Target folder tree (server side)

This is how we'll setup our files and folders:

# TFTP root
/tftpboot/                                   

###############
# Network bootable image(s) using NFS technology
################       

#### Boot file            
/tftpboot/pxelinux.0                   # Initial boot file - only use to load the PXE NetBoot manager
/tftpboot/{menu.c32 || vesamenu.c32}   # PXE interactive menu managers (text or graphical)
/tftpboot/pxelinux.cfg/                # PXE configuration(s)
/tftpboot/pxelinux.cfg/default         # default PXE configuration

#### Kernel file

/tftpboot/images/      

# Debian 7.x [Wheezy] 
/tftpboot/images/wheezy/   
/tftpboot/images/wheezy/vmlinuz
/tftpboot/images/wheezy/initrd.img

# [X]Ubuntu 14.04 [Trusty] 
/tftpboot/images/trusty/  
/tftpboot/images/trusty/vmlinuz
/tftpboot/images/trusty/initrd.img


#### NFS 
# This is where the runnable will be. Each image will be in a dedicated folder.
/nfs/                    

# Debian 7.x [Wheezy] 
/nfs/wheezy/   

# Ubuntu 14.04 [Trusty] 
/nfs/trusty/

Client overview

Each client must have, at least, 4 Go of RAM.

4 GO RAM configuration

This is how we're gonna populate the client:

As you can see, each client will have some space dedicated for swap + some RAMdisk to allow writing in /var, /tmp and /proc.

Configuration of a 4Go RAM disk:

No swap
Local TMPFS (read/write for /dev, /tmp, ...) : 1 Go
- /tmp = 512 M
- /var/tmp = 128 M
- /var/log = 128 M
- /var/run = 8 M
- /var/lock = 8 M
- /run/shm = 256 M
O.S (NFS read only) : all the rest ~ 2.8 Go
Common share (NFS read write) : Remote disk

2 Go

Due to budget restriction we might encounter some low memory machines with only 2 Go...

This is how we're gonna populate the client:

In case of 2Go RAM then you have to use some tricks:

No swap
O.S (NFS read only) : ~ 1.2 Go
Common share (NFS read write) : Remote disk
Local TMPFS (read/write for /dev, /tmp, ...) : all the rest
- /tmp = 372 M
- /var/tmp = auto
- /var/log = 128 M
- /var/run = auto
- /var/lock = auto
- /run/shm = auto

How big is the client image ?

By default the deboostrap Ubuntu 14.04 LTS image is 239 Mo. With the applications we're gonna use that size will increase to about 1 or 1.3 Go depending if you copy (or not) the kernel sources. It may even take 1.6 Go if you're using XFCE frontend.

NFS server setup

Configuration

The NFS configuration is done in the /etc/exports file

vim /etc/exports

Add something like that:

### list of available O.S
  /nfs/trusty         172.16.50.0/24(ro,no_root_squash,no_subtree_check,async,insecure)
  /nfs/wheezy         172.16.50.0/24(ro,no_root_squash,no_subtree_check,async,insecure)
### common share
  /nfs/common         172.16.50.0/24(rw,no_root_squash,no_subtree_check,async,insecure)

Adjust "172.16.50.0/24" to your own network address

rw : Allow clients to read as well as write access
ro : Read only access
insecure : Tells the NFS server to use unpriveledged ports (ports > 1024).
no_subtree_check : If the entire volume (/users) is exported, disabling this check will speed up transfers.
async : async will speed up transfers.
no_root_squash: This phrase allows root to connect to the designated directory.

- NOTE -

It's always a good idea to use Read-Only if you plan to share this disk. That will avoid user to mess with your image!

There must not be any space between network IP and "("

If you plan to share a NFS to all users - like my /nfs/common - don't forget to set chmod -R 777 /nfs/common

Security

Like TFTP, this part is insecure !

You must restrict the access to your NFS server by a firewall script and filtering BEFORE reaching the LAN !

NFS is using dynamic ports numbers because it runs over rpcbind. Making NFS using specifics port is a pain in the ass !! :(

So, instead of that you should allow your LAN communication.

    IPTABLES=`which iptables`
    LAN_ADDRESS="172.16.50.0/24"

    # Allow LAN communication
    $IPTABLES -A INPUT -s $LAN_ADDRESS -d $LAN_ADDRESS -m state ! --state INVALID -j ACCEPT
    $IPTABLES -A OUTPUT -s $LAN_ADDRESS -d $LAN_ADDRESS -m state ! --state INVALID -j ACCEPT

Management

service nfs-kernel-server {status|start|stop|restart}

Test the server

Install the NFS v4 client:

apt-get install nfs-common

To mount the default path:

mount -t nfs nfs-server:/ /mnt

You'll see: "/nfs"

It's better to do:

mount -t nfs nfs-server:/nfs /mnt

NFS client image

There are different way to setup a NFS client image.

The main ones are:

Manually
- debootstrap
- copying the install from your server
- Manual install on a client, then, when the system is ready, copy everything to the NFS share

Using script and software like "Puppet" or "Chef"

Setup client distribution

You have to create one target for each distribution you want to serve:

mkdir -p /nfs/trusty
mkdir -p /nfs/wheezy
mkdir -p /nfs/common

- NOTES -

The folder name should match your NetBoot settings. Folder name = a LABEL in the NetBoot config.

The folder name should match a Linux (Debian like) distribution name

Configure client distribution

Manual configuration: Diskless image configuration - manual setup

Automatic [Puppet || Chef] configuration: Diskless image configuration - script setup

Kernel modules and source

-- This is an optional step ; but it can avoid many bugs --

If you're using a local kernel as the default NetBoot kernel, then you need to do copy the modules + kernel source to every distribution.

# Copy kernel modules
cp -r /lib/modules/`uname -r` /nfs/trusty/lib/modules

# Copy kernel sources
cp -r /usr/src/linux-headers-`uname -r` /nfs/trusty/usr/src

Note that you have to adjust the /nfs/XXX

Backup distribution

You can create an archive of your current distribution for later restore / re-use.

Compression

cd /nfs
tar cvpjf trusty.tar.bz2 ./trusty

Restoration

cd /nfs
tar -xvjf trusty.tar.bz2

PXE interactive menu

You can create interactive NetBoot menus, see:

Local server monitoring

Install the following services:

Other services

File sharing

If you want to expose the NFS common folder as a file-share, you have to install and configure Samba. See: Samba server

Note

Samba is actually better than NFS for the file-share. You should remove Common from /etc/exports and use a samba share instead.

Management UI (webmin)

Since there is a lot of services to manage, it's always convenient to use an UI for it. Check Webmin

VPN server

See VPN

Apache2 server

See Apache 2

References

Ubuntu diskless how-to: https://help.ubuntu.com/community/DisklessUbuntuHowto

Mind reference: http://mindref.blogspot.se/2011/03/debian-diskless.html

Super video tutorials:

Nice explanation of PXE process: http://www.linux.com/learn/docs/ldp/497-Diskless-root-NFS-HOWTO

How to improved /etc/fstab: http://www.askapache.com/optimize/super-speed-secrets.html

Anonymous

Search

Navigation

Navigation

Categories

Wiki tools

Wiki tools

Diskless netboot

Namespaces

Page actions

Contents

Target folder tree (server side)

Client overview

4 GO RAM configuration

2 Go

How big is the client image ?

NFS server setup

Configuration

Security

Management

Test the server

NFS client image

Setup client distribution

Configure client distribution

Kernel modules and source

Backup distribution

Compression

Restoration

PXE interactive menu

Local server monitoring

Other services

File sharing

Management UI (webmin)

VPN server

Apache2 server

References

Anonymous

Search

Navigation

Wiki tools

Page tools

Categories

Diskless netboot

Contents

Target folder tree (server side)

Client overview

4 GO RAM configuration

2 Go

How big is the client image ?

NFS server setup

Configuration

Security

Management

Test the server

NFS client image

Setup client distribution

Configure client distribution

Kernel modules and source

Backup distribution

Compression

Restoration

PXE interactive menu

Local server monitoring

Other services

File sharing

Management UI (webmin)

VPN server

Apache2 server

References