DHCP and network configuration

Hostname and network configuration + DHCP server

Network configuration

Get the current status

Get current IP @ and connection details

Display connection settings

ifconfig

if you have many network card you can filter using interface name (eth0 // eth1 // wlan0).

To get more details

ifconfig -a

Discover your gateway

route

Default gateway is named "default"

Setup DHCP / static IP @

By default the system is using DHCP.

Following procedure will set a fix IP.

Edit configuration file:

vim /etc/network/interfaces

Adjust the file like this:

# The loopback network interface (127.0.0.1)
auto lo
iface lo inet loopback

# The primary network interface [DHCP]
#allow-hotplug eth0
#auto eth0
#iface eth0 inet dhcp


# The primary network interface [static IP]
auto eth0
iface eth0 inet static
        address 192.168.0.100				# mandatory
        netmask 255.255.255.0				# mandatory
        gateway 192.168.0.1				# mandatory
        network 192.168.0.0				
        broadcast 192.168.0.255
        # Google 8.8.8.8 8.8.4.4
        # OpenDNS 208.67.222.222 208.67.220.220 
        #          https://www.opendns.com/home-internet-security/opendns-ip-addresses/
        dns-nameservers 208.67.222.222 208.67.220.220

        ## If you belong to a domain you can add a reference to it
        dns-search smartcards.vehco.com
        dns-domain smartcards.vehco.com

Then, restart configuration

/etc/init.d/networking restart

Wifi

Debian network manager

su root
nm-connection-editor

WEP

Edit:

vim /etc/network/interfaces

Add:

auto wlan0
iface wlan0 inet dhcp
  wireless-essid NUMERICABLE-F164
  wireless-key f4c1dc12023b916d309c2561cb
  wireless-channel 11
  wireless-mode managed

WPA

Required software

You must install wpa supplicant

apt-get install wpasupplicant

Restrict the permissions of interfaces configuration to prevent code disclosure:

chmod 0600 /etc/network/interfaces

Configuration

Edit

vim /etc/network/interfaces

Adjust like that:

auto wlan0
iface wlan0 inet dhcp 
    wpa-ssid ssid
    wpa-psk password

Take changes into account

Then, you have to start your wireless interface:

ifup wlan0

Restart configuration

/etc/init.d/networking restart

Hostname

Get hostname

Just run the following command:

hostname

Setup hostname

Hosts files

Edit configuration file

vim /etc/hosts

You should have something like that (for fixed IP):

127.0.0.1	localhost
127.0.1.1	myServerName.myDomain  myServerName

# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

Hostname

echo myServerName.domain.com > /etc/hostname

Take changes into account

Reboot server

shutdown -r now

Check result

hostname
hostname -f

You should have 2 similar results: server1.example.com